Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Auth Server – Enter the authenticating server IP address or host name.
•
Auth Domain – Type in the domain suffix server name based on your location.
Exemple:
•
NSW / ACT - nsw.bigpond.net.au
•
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
•
•
MTU Size – The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not
recommended that you change the default MTU Size unless required by your ISP.
•
Connect on Demand - In this mode, the Internet connection can be terminated automatically after a specified inactivity
period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet
connection keeps active all the time, please enter "0" in the Max Idle Time field. Otherwise, enter the number of minutes
you want to have elapsed before your Internet access disconnects.
•
Connect Automatically – The connection can be re-established automatically when it was down.
•
Connect Manually – You can click the Connect/Disconnect button to connect/disconnect immediately. This mode
also supports the Max Idle Time function as Connect on Demand mode. The Internet connection can be disconnected
automatically after a specified inactivity period and re-established when you attempt to access the Internet again.
Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately.
140
Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle Time because some applications are
visiting the Internet continually in the background.
Click the Save button to save your settings.
5. If your ISP provides L2TP connection, please select L2TP option. And you should enter the following parameters (Figure 4-12):
•
User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.
www.multilaser.com.br
Publicidad
Tabla de contenido
