Multilaser RE027 Manual Del Usuario página 139

www.multilaser.com.br
3. If your ISP provides a PPPoE connection, select PPPoE option. And you should enter the following parameters (Figure 4-9):
• User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.
• Secondary Connection – It's available only for PPPoE Connection. If your ISP provides an extra Connection type
such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/
Static IP to activate this secondary connection.
- Disabled – The Secondary Connection is disabled by default, so there is PPPoE connection only. This is
recommended.
- Dynamic IP – You can check this radio button to use Dynamic IP as the secondary connection to connect to
the local area network provided by ISP.
- Static IP – You can check this radio button to use Static IP as the secondary connection to connect to the local
area network provided by ISP.
• Connect on Demand – In this mode, the Internet connection can be terminated automatically after a specified inactivity
period (Max Idle Time) and be re-established when you attempt to access the Internet again. If you want your Internet
connection keeps active all the time, please enter "0" in the Max Idle Time field. Otherwise, enter the number of minutes
you want to have elapsed before your Internet access disconnects.
Figure 4-9 WAN - PPPoE
137