Time Settings - Multilaser RE027 Manual Del Usuario

corresponding function. The detailed explanations for each submenu are provided below.
4.16.1. Time Settings
Choose menu "System Tools > Time Settings", you can configure the time on the following screen.
188
• Time Zone - Select your local time zone from this pull down list.
• Date - Enter your local date in MM/DD/YY into the right blanks.
• Time - Enter your local time in HH/MM/SS into the right blanks.
• NTP Server Prior - Enter the address for the NTP Server, then the Router will get the time from the NTP Server preferentially. In
addition, for some built-in common NTP Servers, the Router can get time automatically once it connects the Internet.
To configure the system manually:
1. Select your local time zone.
2. Enter date and time in the right blanks.
3. Click Save to save the configuration.
To configure the system automatically:
1. Select your local time zone.
2. Enter the IP address for NTP Server Prior.
3. Click the Get GMT button to get system time from Internet if you have connected to the Internet.
Note:
Figure 4-71 Time settings
www.multilaser.com.br