Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
166
•
Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-
down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the
statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood.
•
DoS protection - Denial of Service protection. Check the Enable or Disable button to enable or disable the DoS protection
function. Only when it is enabled, will the flood filters be enabled.
Note:
Dos Protection will take effect only when the Traffic Statistics in "System Tool > Traffic Statistics" is enabled.
•
Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering.
•
ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current
ICMP-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately.
•
Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.
•
UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between 5 ~ 3600. When the current
UPD-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately.
Figure 4-40 Advanced Security
www.multilaser.com.br
Publicidad
Tabla de contenido
