Forwarding; Virtual Servers - Multilaser RE027 Manual Del Usuario

To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disabled All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the previous page.
4.8. Fowarding
158
There are four submenus under the Forwarding menu (shown in Figure 4 31): Virtual Servers, Port Triggering, DMZ and UPnP. Click
any of them, and you will be able to configure the corresponding function.
4.8.1 Virtual Servers
Choose menu "Forwarding > Virtual Servers", you can view and add virtual servers in the screen as shown in Figure 4-32. Virtual
servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port,
and all requests from the Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used
for a virtual server must have a static or reserved IP Address because its IP Address may be changed when using the DHCP function.
Figure 4-31 The Forwarding menu
Figure 4 32 Virtual Servers
www.multilaser.com.br