Publicidad
Idiomas disponibles
Idiomas disponibles
7.- STARTING-OFF.
1. Select the time for backwash with help of switch nº 2 (normally 3 minutes for swimming pool
water treatment and 6 minutes for drinking water installations).
2. Select the time for rinse with help of switch nº 3 (30 seconds for swimming pool water
treatment and 2.5 minutes for drinking water installations).
3. Adjust the pressure controller to the backwash pressure (normally 1.7 bar).
4. Adjust the pump/s' time clock inside the control box according to the working hours you
wish. Set the clock.
5. Turn on the power supply to the control box and set switch nº 4 where required.
INSTALLATION AND
OPERATION MANUAL
Rev:
03
Year:
2011
Page:
15 / 17
ENG
Publicidad
