Remote Commander - Sony VPL-PX11 Manual De Instrucciones

3 INPUT B connectors
Connects to a computer.
RGB connector (HD D-sub 15-pin, female):
Connects to the monitor output connector of a
computer using the supplied cable. This
connector accepts monitor output signals only
from a computer.
AUDIO jack (stereo minijack): Connects to the
audio output connector of the computer.
4 OUTPUT connectors
Connects to external equipment such as a monitor.
MONITOR connector (HD D-sub 15-pin, female):
Connects to the video input connector of external
equipment such as a monitor. Outputs currently
selected signals from the INPUT A/B connector.
AUDIO jack (stereo minijack): Connects to the
audio input connector of external equipment.
When connected to an active speaker, you can
control the volume of the speaker using the
VOLUME +/– keys on the control panel.
5 REMOTE (RS-232C) connector (D-sub 9-pin,
female)
Connects to a computer to operate the projector from
the computer.
6 VIDEO IN (Video input) connectors
Connect to external video equipment such as a VCR.
S VIDEO connector (mini DIN 4-pin): Connects to
the S video output (Y/C video output) of video
equipment.
VIDEO jack (phono type): Connects to the
composite video output of video equipment.
AUDIO jack (stereo minijack): Connects to the
audio output of the VCR.
Location and Function of Controls

Remote Commander

Keys which have the same names as those on the
control panel function identically.
qh
qg
FREEZE MS SLIDE
qf
D KEYSTONE
INPUT
qd
MENU
qs
MUTING
qa
+
RESET
q;
–
D ZOOM
9
1
FUNCTION
1 I / 1 (on / standby) key
2 APA (Auto Pixel Alignment) key
3 PIC (Picture) MUTING key
Cuts off the picture. Press again to restore the picture.
4 ENTER key
5 Joystick
Functions as the mouse of the computer connected to
this projector.
6 Arrow (M/m/</,) keys
7 R (right) CLICK key
Functions as the right button of a mouse.
1
I / 1
2
APA
3
ENTER
PIC
4
5
6
R
7
CLICK
8
2
13
(GB)