Remote Commander - Sony VPD-MX10 Manual De Instrucciones

Remote Commander

The keys that have the same names as those
on the control panel function identically.
You can control a connected computer using
the Remote Commander.
For details, see "To control the computer
using the supplied Remote Commander" on
page 22.
qh
qg
FREEZE
qf
qd
D KEYSTONE
INPUT
qs
MENU
qa
0
+
9
–
D ZOOM
8
1
FUNCTION
/ key
1
I 1 1 1 1
2 APA (Auto Pixel Alignment) key
3 ENTER key
4 Joystick
Functions as the mouse of the computer
connected to the unit.
5 Arrow keys (M M M M /m m m m /<
12
GB
Location and Function of Controls
I / 1
MS SLIDE
1
2
APA
ENTER
3
4
5
RESET
R
6
CLICK
2
7
< < /, < , ) , ,
6 R CLICK key
Functions as the right button on a mouse.
7 FUNCTION 1, 2 keys
These keys function when the supplied
application software is used.
When you connect the projector with a
computer, you can open a file on the
screen by just pressing the FUNCTION
key. This will enhance your
presentation. To use this function,
allocate a file to the FUNCTION key by
using the application software.
For details, see the README file and
the HELP file supplied with the
application software.
8 RESET key
Resets the value of an item back to its
factory preset value or returns the
enlarged image back to its original size.
9 D ZOOM +/– key
Enlarges the image at a desired location
on the screen.
+: Pressing the + key once displays the
icon. This icon indicates the point you
want to enlarge. Use an arrow key (M/
m/</,) to move the icon to the
point to be enlarged. Press the + key
repeatedly until the image is enlarged
to your requirements.
–: Pressing the – key reduces an image
that has been enlarged with the D
ZOOM + key.
q; L CLICK key
Functions as the left button on a mouse.
qa MENU key
qs D KEYSTONE key
Adjusts trapezoidal distortion of the
picture that may occur depending on the
projector angle. Use an arrow key (M/m/
</,) to square the image.
qd INPUT key
qf FREEZE key
Used to freeze the picture projected. To
cancel the frozen picture, press the key
again.