Remote Commander/Control Panel; Light Button - Sony VPH-G90E Manual De Instrucciones

Location and Function of Controls

Remote Commander/Control Panel

The locations and functions of the keys on the remote
commander are the same as those on the control panel
of the projector. (Only the remote commander is
equipped with the transmission indicator and the
COMMAND ON/OFF switch.)
The remote commander may be used as a wired or
wireless remote control.
@∞
@¢
@£
@™
@¡
@º
!ª
!•
!¶

1 LIGHT button

Illuminates the key indicators when the COMMAND
switch 5 is set to ON. If the COMMAND switch is
set to OFF, only the COMMAND switch is
illuminated.
The key indicators turn off if you press the LIGHT
button again.
If you do not press any key for more than 30 seconds,
the indicators also turn off automatically.
When the remote commander is connected to the
CONTROL S IN/PLUG IN POWER jack of the
projector via the remote control cable, the power is
supplied to the remote commander from the projector.
14
(GB) Overview
1 2 3 4
LIGHT
MUTING STATUS COMMAND
OFF
PIC AUDIO OFF ON
RGB
NORMAL DOT PHASE SIZE SHIFT
APA
LCD LENS CONTROL
PATTERN ZOOM SHIFT FOCUS
INPUT SELECT
VIDEO SELECT SYS SET BLKG
VIDEO/S VIDEO
A B C D
SWITCHER/VIDEO MEMORY/INDEX
1 2 3 4
5 6 7 8 SHARP
SW NO/
VIDEO MEMORY
9
10/0(ALL) OFF/GROUP
SWITCHER INDEX
Notes
• The RGB APA/DOT PHASE 4, VOL +/– !§,
INPUT SELECT D !ª, LCD LENS CONTROL @£
and AUDIO MUTING @∞ keys do not function with
this projector.
• The RGB SIZE/SHIFT 4, CENT R/B 6 and BLKG
@¡ keys function only in the pro-user mode.
• The keys on the control panel are basically effective
for this projector only. Only the commands from the
SYS SET key and the switcher select commands are
transmitted to the connected equipment via the PJ
COM connector.
5 6 7
8
ON
STANDBY ON
CENT
R MEMORY
MENU
B
RESET FUNCTION ENTER
PICTURE CONTROL
BRIGHT CONTR POSITION
HUE COLOR VOL
2 Transmission indicator (only for the remote
commander)
Lights each time you press a key. If it does not light,
replace the batteries with new ones.
3 STATUS ON/OFF keys
Press OFF to eliminate the on-screen display.
Press ON to restore the on-screen display.
Note
The menus and warning messages appear even if the
OFF key is pressed.
9
0
!¡
!™
!£
!¢
!∞
!§