Projecting - Sony VPL-PX11 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
Press the M or m key to select LANGUAGE, then
press the , or ENTER key.
6
Press the M or m key to select a language, then
press the < or ENTER key.
The menu changes to the selected language.
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.

Projecting

ON/STANDBY
APA key
indicator
LAMP/
TEMP/
COVER
FAN
HELP
VOLUME
APA
RESET
FREEZE
MS SLIDE
D KEYSTONE
INPUT
MENU
MUTING
+
RESET
D ZOOM
1
FUNCTION
RM-PJM12
PROJECTOR
3 2
POWER
ON/
SAVING
STANDBY
MENU
INPUT
ENTER
Rear remote
control detector
2
I / 1
3
APA
APA key
ENTER
PIC
R
CLICK
2
Selecting the Menu Language / Projecting
1
After all equipment is connected completely, plug
the AC power cord into the wall outlet.
The ON/STANDBY indicator lights in red and the
projector goes into the standby mode.
2
Press the I / 1 key to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on all equipment connected to the projector.
Press the INPUT key to select the input source.
INPUT-A: Selects the video signal input from the
INPUT A connector.
INPUT-B: Selects the video signal input from a
computer connected to the INPUT B
connector.
VIDEO: Selects the video signal input from a
VCR connected to the VIDEO jack on the
VIDEO IN connectors.
S-VIDEO: Selects the video signal input from a
VCR connected to the S VIDEO connector on
the VIDEO IN connectors.
Depending on the type of computer you have, for
example a notebook, or an all-in-one LCD type,
you may have to switch the computer to output to
the projector by pressing a certain combination of
keys (e.g.,
, etc.), or by changing your
computer's settings.
F7
Fx
or
Fn
4
Turn the zoom ring to adjust the size of the
picture.
5
Turn the focus ring to adjust the focus.
Note
Looking into the lens when the projector is projecting
an image may cause injury to your eyes.
To cut off the picture
Press the PIC MUTING key on the Remote
Commander. To restore the picture, press the PIC
MUTING key again.
19
(GB)

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido