Quick Guide - boso medilife S Manual Del Usuario

Quick guide

➡ Insert batteries, ensure correct posi-
tioning (page 46)
➡ Attach unit (page 51)
When measuring, the wrist must be
held at the same height as the heart!
➡ Start (and stop) a measurement by
pressing the 'START' button (page 54)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (page 56)
➡ Retrieving values from memory
(page 58): with the instrument swit-
ched off, press the 'START' button
until 'M' is displayed. The first value
displayed is the average value of all
stored measurements together with
the WHO classification.
The total number of stored measure-
ments is displayed at the same time,
e.g. 'A30'. The individual measure-
ment values are then displayed in
sequence.
This quick guide does not replace
the detailed information on the use and
safety of the blood pressure monitor
featured in the user instructions.
Therefore, please ensure rea-
ding the user instructions!
41