Displaying Individual Stored Values - boso medilife S Manual Del Usuario

Displaying individual stored values

The latest measurement stored will be
indicated immediately after the average
value has been displayed.The number of
the measurement appears in the display
(see illustration 8). After 3 seconds the
corresponding measurement value (sy-
stole, diastole, pulse, see illustration 9),
appears automatically.
M M
M
N 01
Illustration 8 Illustration 9
All stored measurements are displayed
in the same manner automatically.
Up to 30 measurements are stored.
➡ The unit can be switched off by sim-
ply pressing the 'START' button.
If no button is pressed, the unit switches
off automatically after 5 seconds.
Systole
mmHg
Diastole
How to erase memory:
mmHg
Open the battery compartment for 5
Pulse/
seconds to erase all memory.
min.
61