Vacuum cleaner description
Vacuum Cleaner Parts and Labels
Figure 1
1.
Data plate which includes:
•
Manufacturer's name and address
•
Technical specifications
•
Serial number
•
Year of manufacture
•
Weight (kg)
2.
Panel power plate
Indicates that the panel must only be powered by the
voltage indicated on the data plate.
3.
Inlet
4.
Air Outlet
5.
Manual motor starter
6.
Motorhead
7.
Band latches
8.
Container release handle
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4) and blows out from the motor head
cover (5).
Before turning the vacuum cleaner on, fit the vacuum hose
into the inlet and then fit the required tool on the end of the
hose. After the hose and tools have been fitted, make sure
that the motor turns correctly.
The vacuum cleaner is equipped with a main filter which
enables it to be used for the majority of applications.
Besides the main filter which retains the more common types
of dust, the vacuum cleaner can be fitted with an upstream
absolute (HEPA) filter with a higher filtering capacity for fine
dust and substances harmful to health.
11/2016
Optional kits
Please contact the manufacturer's sales network for
information on options.
Instructions for installing the options are included in the
conversion kit.
WARNING!
Use only genuine optional kits supplied and
authorized by the manufacturer.
Optional kits must be installed by Nilfisk qualified
personnel.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and authorized
by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
A
MODEL
in.
(mm)
VHS110 Z22 V230
700
VHS110 Z22 V110
*
Weight with packaging
Unpacking, moving, use and storage
Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight.
5
VHS110 Z22
Figure 2
B
C
lbs.*
in.
in.
(kg)
(mm)
(mm)
57
790
1440
59
GB
C421