Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL UNIT
Using the Remote Control Unit
By using the provided remote control unit, the
receiver and some other TEAC components used with
it can be controlled from your listening position.
To use the remote control unit, point it at the REMOTE
SENSOR window of the receiver (or other TEAC
component).
REMOTE SENSOR window
of the receiver or other
TEAC component
Notes:
Even if the remote control unit is operated within the
effective range, remote control operation may be
impossible if there are any obstacles between the unit
and the remote control.
If the remote control unit is operated near other
appliances which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly. Conversely,
the other appliances may operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two "AA" (R6, SUM-3) dry batteries.
Make sure that the batteries are inserted with their
positive ± and negative — poles positioned correctly.
3. Close the cover until it clicks.
Battery Replacement
If the distance required between the remote control unit
and main unit decreases, the batteries are exhausted. In
this case replace the batteries with new ones.
Precautions concerning batteries
Be sure to insert the batteries with correct positive
"±" and negative "—" polarities.
Use batteries of the same type. Never use different
types of batteries together.
Rechargeable and non-rechargeable batteries can be
used. Refer to the precautions on their labels.
When the remote control unit is not to be used for a
long time (more than a month), remove the batteries
from the remote control unit to prevent them from
leaking. If they leak, wipe away the liquid inside the
battery compartment and replace the batteries with
new ones.
Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.
– 23 –
Publicidad
Tabla de contenido
