Transport
Transport
DE
EN
WARNING
FR
An unsecured, incorrectly secured or incorrectly
positioned charger can slip out of place and endanger
IT
the vehicle occupants during braking, acceleration,
ES
changes of direction or in accidents.
e Never transport the charger unsecured.
PT
e Always transport the charger in the luggage
NL
compartment, never in the passenger
compartment (e.g. on or in front of the seats).
SV
Securing the Charger for Transport
FI
The charger is supplied with or without a transport
DA
case, depending on vehicle type.
e If a transport case is supplied: Always stow and
NO
transport the charger in the case. Attach the case
EL
to the front and rear tie-down rings with hooks.
CZ
For information on the tie-down rings in the
luggage compartment:
HU
f Refer to the Driver's Manual.
e If a transport case is not supplied: Stow the
PL
charger in the rear luggage compartment
HR
for transport.
e Depending on vehicle type, stow the charger
SR
in such a way that it does not endanger
SK
any occupants in dangerous situations.
SL
ET
LT
LV
RO
BG
MK
38
Basic Wall Mount
Attaching the Control Unit to the
Unsecured load
Basic Wall Mount
Fig. 10: Attaching the control unit
1. Route the vehicle cable through the lower
opening in the basic wall mount, place the bottom
of the control unit on the locking tab push back
to engage.
2. Guide the supply cable through the upper
opening in the basic wall mount and lock
the circlip by pushing it to the left.
3. Insert the vehicle plug in the connector fastener.
Charging Dock
Fig. 11: Charging dock
Opening the Charging Dock
e Press the door of the charging dock in the
direction of the arrow.
The door opens automatically.
Closing the Charging Dock
e Close the door of the charging dock and press
in direction of arrow.
Locking the Charging Dock
e Turn the lock to position A.
Unlocking the Charging Dock
e Turn the lock to position B.