USING CHILD RESTRAINT
FORWARD-FACING
WITH LOWER ANCHOR CONNECTORS
When installing this child restraint with lower
9
anchor connectors (OR the vehicle seat belt
9
see p. 76-87), always use the Tether.
A tether reduces movement of a
FORWARD-
FACING
child restraint in a crash and helps
to achieve a tight installation. Tether anchor
locations vary from vehicle to vehicle.
Refer to your vehicle owner's manual for
exact locations, anchor identification, and
requirements.
IF TETHER ANCHOR IS AVAILABLE IN YOUR
VEHICLE - Before placing the child restraint
in the vehicle, remove tether from the tether
compartment by unfastening it from the hook
inside the compartment. If a tether anchor
is not available, the tether should be stored
properly.
70