Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

AUDIO SETTINGS

For key layout on the faceplate, see page 3 or page 4.
Select a preset equalizer directly
Press EQ-BASS repeatedly.
(or)
Press EQ-BASS, then turn the volume knob within 5 seconds.
Preset equalizer:
[FLAT] (default)/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/[POP]/
[R&B]/[TALK]/[USER]/[VOCAL BOOST]/[BASS BOOST]/[CLASSICAL]/[DANCE]
• Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
Select a drive equalizer directly
Drive equalizer boosts specific frequencies in the audio signal to reduce the
noise heard from outside the car or running noise of the tyres.
Press drvn-BASS repeatedly.
Drive equalizer: [DRVN 3] (default)/[DRVN 2]/[DRVN 1]
Store your own sound settings
1
Press and hold the following button to enter [EASY EQ] setting.
KD-T409/KD-T402: EQ-BASS
KD-T401:
drvn-BASS
2
Perform 'Select an item (page 3 or 4)' operation to make the
setting.
Refer to [EASY EQ] for setting and the result is stored to [USER].
• To return to the previous setting item, press
• Press the following button to exit.
KD-T409/KD-T402: EQ-BASS
KD-T401:
drvn-BASS
10
ENGLISH
(for KD-T409/KD-T402)
(for KD-T401)
.
Other settings
1
Press and hold
.
2
Perform 'Select an item (page 3 or 4)' operation to select an
item (see the following table).
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
[EQ SETTING]
[PRESET EQ]
Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/
[JAZZ]/[POP]/[R&B]/[TALK]/[USER]/[VOCAL BOOST]/[BASS BOOST]/
[CLASSICAL]/[DANCE]
[EASY EQ]
Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [PRO EQ].
[SUB.W SP]*1*2: [00] to [+06]
[SUB.W]*1*3:
[–08] to [+08]
[BASS]:
[LVL–06] to [LVL+06]
[MID]:
[LVL–06] to [LVL+06]
[TRE]:
[LVL–06] to [LVL+06]
*1, *2, *3: (page 11)
.
Default: [XX]
(Default: [+03]
[00]
[LVL 00]
[LVL 00]
[LVL 00])

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-t402Kd-t401

Tabla de contenido