Remote Control; Selecting The Operating Mode - EdilKamin FANTASY Instrucciones De Uso

REMOTE CONTROL

Key to buttons and display:
: ignition / shutdown button
+
: button to increase the power/operating temperature (when inside a menu, it increases the displayed variable)
-
: button to decrease the power/operating temperature (when inside a menu, it decreases the displayed variable)
A : button to switch to the "EASY TIMER " program
M : button to toggle from automatic to manual mode and vice versa
TEMPERATURE DETECTED BY THE REMOTE CONTROL
The remote control is equipped with an internal sensor to detect the room temperature and display it in real time.
The detected temperature is transmitted periodically to the control board of the insert/stove if the transmission LED of
the remote control and the receiving sensor of the synoptic panel of the insert/stove are in each other's eld of view.
If the temperature of the remote control does not reach the control board of the insert/stove for over 30 minutes, the
temperature detected by the sensor connected to the synoptic panel is used.

SELECTING THE OPERATING MODE

The following functions can be scrolled through and set by brie y pressing the "M" button:
automatic power adjustment
manual power adjustment
INSTRUCTIONS FOR USE
- 41
Indicates data transmission between the remote control and the
control board.
blocked keypad; avoid turning on the remote control
for no reason (press "A" and "M" simultaneously for
a few seconds to block/unblock the keypad)
at battery (3 mini alkaline batteries type AAA)
Indicates that ignition / shutdown is being via the "EASY
TIMER" program
Indicates the room temperature detected by the remote control
(it indicates the values of the set parameters during its technical
set-up).
Indicates that a setting has been transmitted for
the stove to ignite
pellet/air stove remote control setting indicator
automatic function
(the temperature value appears on the display)
manual adjustment function
(the operating power value appears on the display)
-