Size 2.8 Hose; Cassette Medium; Cassette Large - Heidolph PD 5001 Manual De Instrucciones

5.1.4.2. Size 2.8 hose

Use cone from your hardware kit. Refer to fig. 42 and plug hose through coupling nut, after having
trimmed (pointed) hose end. After installation cut pointed end apart. Install cone as shown, pull
coupling nut hand-tight.

5.2. Cassette medium;

Medium-model cassettes exclusively have been designed for C8 multi-channel
pump heads.
Installation procedure is the same as described for the small-model cassette (refer to Chapter 5.1
ff); these cassettes however do not feature stoppers, they use hoses from the reel only (refer to
Chapter 15, reference table).
When cassette is interlocked with multi-channel pump head exert some pull force on both ends of
the hose to prevent hose from looping.
To adjust roller contact pressure, turn setting knob until inboard wedge reads between 3 and 4 on
the scale; refer to Chapter 5.1.1 to optimize roller contact pressure.

5.3. Cassette large

Large-model cassettes exclusively have been designed for C8 multi-channel
pump heads.
Installation procedure is the same as described for the small-model cassette (refer to Chapter 5.1
ff); these cassettes however do not feature stoppers, they use hoses from the reel only (refer to
Chapter 15, reference table).
The large-model cassette features adjustable hose retainers on in- and outlet ends. These
retainers adjust hose clamping action for different sizes of hoses. To adjust setting knob (61) make
reference to fig. 43 and the reference table below:
size of hose
1,7
3,1
4,8
6,3
PACKING
set to
14
16
25
17
55
fig.42
HOSE CASSETTE
SIZE OF
HOSE
HOSE RETAINER
BUTTON
61
fig. 43
IEI