General Characteristics - Cembre B-TC250BS Manual De Uso Y Mantenimiento

1. GENERAL CHARACTERISTICS

Application range
Max. cutting diameter
Operating pressure
Dimensions
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Weight
Acoustic noise (1)
(2)
Vibration
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
(1)
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
Directive 2006/42/EC, annexe 1, point 2.2.1.1
(2)
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 and UNI EN 28662-1
Standards, and under operating conditions much more severe than those normally found.
Battery charger ASC30-36
Input
5
suitable for cutting Copper, Aluminium, ACSR and Steel
mm (inches)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from a rapid
advancing speed of the ram to a slower, more powerful speed
type
V / Ah ( Wh)
kg (lbs)
dB L
m/s
2
B-TC250BS B-TC250BSE B-TC250BST B-TC250BSA
type EU
27044000
V / Hz (W)
conductors, ropes and rods
26 (1")
450 (6,500)
436 x 140 x 81 (17.2 x 5.5 x 3.2)
3,4 (7.5)
18
-15 a +50 (+5 a +122)
AGIP ARNICA 22 or equivalents
maximum pressure valve
CB1820L Li-Ion
18 / 2.0 (36)
0,40 (0.88)
64,9 (A) L 99,7 (C)
pA pCPeak
0.527 max.
UK
27045000 27047000
220 - 240 / 50 - 60 (85)
L 69,3 (A)
WA
AUS/NZ USA/CAN
27046000
115 / 60 (85)