General Characteristics - Cembre HT-TC041N Manual De Uso Y Mantenimiento

• Wear eye protection. Metal chips can fl y from blades when cutting.
• Do not cut short, unsecured pieces of steel rod or rope as they may fl y off dangerously, causing
injury to the operator or persons nearby.
• Inspect the blades before each use. Do not use damaged blades.
• Damaged blades can break and cause injury or damage to the tool.
• Work in a clean, uncluttered area. Keep persons away from immediate work area.
• Use this cutting tool for the manufacturer's intended purpose only.
• Do not cut live cables or conductors.

1. GENERAL CHARACTERISTICS

– Application range: suitable for cutting steel ropes and conductors with max. overall diameter
– Rated operating pressure: ..........................................................................................700 bar
– Dimensions: length ........................................................................................................552 mm (21.7 in.)
width .........................................................................................................144 mm (5.6 in.)
– Weight: ................................................................................................................................5,8 kg
– Oil: ............................................................................... ENI ARNICA ISO 32
– Operating positions: the three operating positions are identifi ed on the main handle (04), which
rotates relative to the reference symbol
– Advancing speed. The tool automatically switches from a fast advancing speed of blades to a
slower cutting speed.
– Safety. The tool is provided with max pressure valve; MPC1 special manometer, is available upon
request to check the proper setting of the valve.
3
HYDRAULIC CUTTING TOOL
HT-TC041N
of 45 mm (1-25/32"), as indicated in § 7.
Rest position (Handles locked): lock handles together when tool is
not in use.
Release position: close the moveable handle (52) against the main
handle (04), in order to discharge the oil pressure and retract the lower
blade.
Operating position: operate the moveable handle (52), to build up
pressure and close the lower blade.
WARNING
SHELL TELLUS S2 V 32
(see Fig. 1).
ENGLISH
(10,000 psi)
(12.8 lbs)
or
or equivalent