General Specifications; Environmental Parameters; Tightening Torque; Accessories And Spare Parts - Dräger Polytron 8000 Serie Instructions For Use

®
Power supply Polytron
Operating voltage
Inrush current
1) At supply voltages of < 7 V DC the instrument provides a fault signal.
Operating current (max.)
®
Polytron 8100 EC
without relay, non-
remote sensor
with relay, remote
sensor
®
Polytron 8200 CAT
without relay, non-
remote sensor
with relay, remote
sensor
®
Polytron 8310 IR
without relay, non-
remote sensor
with relay, remote
sensor
®
Polytron 87x0 IR
without relay, non-
remote sensor
with relay, remote
sensor

17.5 General specifications

®
Enclosure Polytron 8xx0
Enclosure material
Enclosure protection NEMA 4X
Display
®
1) Polytron 8100 EC NEMA 4X enclosure protection pending.

17.6 Environmental parameters

See sensor data sheet for sensor specifications and
influences.
®
Polytron 8xx0
Pressure (performance
approval)
Pressure (explosion pro-
tection)
Dräger Polytron
8xx0
1)
10 to 30 V at the instrument
2.3 A for 2 ms at 24 V ,10 Ω
resistor
80 mA
100 mA
105 mA (DrägerSensor DQ)
130 mA (DrägerSensor LC)
145 mA (DrägerSensor DQ)
165 mA (DrägerSensor LC)
145 mA
185 mA
330 mA
350 mA
copper free aluminum or 316L
stainless steel
1)
IP 65/66/67
Resolution 128 x 64 pixel, back-lit
20.7 to 38.4 in. Hg (700 to
1300 hPa)
23.6 to 32.5 in. Hg (800 to
1100 hPa)
®
8000 Series
®
Polytron 8xx0
Humidity
Temperature
® 1)
Polytron 8100 EC
®
Polytron 8200
3)
CAT
®
Polytron 8310 IR
® 3)
Polytron 87x0 IR
Storage temperature
Storage pressure
Storage humidity
1) See specific EC sensor data sheet for limitations to the maximum
specification.
2) Value from Ex approval. For values without this footnote, EX and per-
formance Approval values are identical.
3) Except for relay option and UL approval-relevant installations. For
relay option and UL installations: -40 to + 158°F (-40 to +70°C)
The values for accessories and spare parts are less strict than
or identical to those of the transmitter. For exact values, refer
to the corresponding manual.

17.7 Tightening torque

Instrument threads
Enclosure lid
Sensor
Blind plugs
Ports (for conduits or
cable glands)
Docking Station
blind plugs
Docking Station
cable glands
Field wiring terminals
Power supply, sig-
nals and relays
Grounding screws
18

Accessories and spare parts

This chapter gives an overview of the main parts that are
covered by the BVS 13 ATEX G 001 X and PFG 14 G 001 X
type examination. For other parts refer to the spare parts list
or contact DrägerService.
Accessories and spare parts
0 to 100%RH, non-condensing
-40 to +149 °F (-40 to + 65 °C)
2)
-40 to + 158 °F (-40 to + 70 °C)
-40 to +176 °F (-40 to +80 °C)
-40 to +149 °F (-40 to +65 °C)
-40 to +170 °F (-40 to +77 °C)
2)
-40 to + 176 °F (-40 to + 80 °C)
-4 to +149 °F (-20 to +65 °C)
26.5 to 32.4 in. Hg (900 to 1100
hPa)
0 to 100%RH, non-condensing
≥44 LB IN. / ≥5 Nm
min. 266 LB IN. / min. 30 Nm
min. 266 LB IN. / min. 30 Nm
min. 443 LB IN. / min. 50 Nm
62 lbs-in / 7 Nm
70 lbs-in / 8 Nm
4.4 - 7.0 LB IN. / 0.5 - 0.8 Nm
10.6 LB IN. / 1.2 Nm
en
2)
2)