Intended Use; General Safety Instructions - Festool LRS 400 Manual De Instrucciones

LRS 400
GB
Original operating manual
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Sym- Significance
bol
Warning of general danger
Read instruction manual!
Wear ear protection.
Wear protective goggles.
Wear a dust mask.
Do not dispose of as domestic waste.
2 Technical data
Compressed air orbital
sander
Drive
Operating pressure (flow pres-
sure)
Speed
Working strokes
Sanding stroke
Air consumption at nominal
load
Sanding shoe
Weight
3

Intended use

The tools are designed for sanding wood, plastic,
composite materials, paint/varnish, filling materi-
al, metal and similar materials. Materials contain-
ing asbestos must not be processed.
The user is liable for improper or non-in-
tended use.
12
LRS 400
Compressed-air vane motor
5500 - 8000 min
11000 - 14000 min
310 l/min
400 x 80 mm
4 Safety instructions
4.1

General safety instructions

General safety regulations
Warning! Before setting up, using, repairing
and servicing this compressed air tool or re-
placing accessory parts, you must have read and
understood all safety instructions and informa-
tion. Ignoring warning notes and instructions may
result in serious injuries.
– Only trained and qualified persons are permitted
to set up, adjust and operate this compressed air
tool. Persons without the relevant qualifications
and training are more likely to cause accidents.
– This compressed air tool may not be modified.
Modifications may reduce the effectiveness of
safety devices and pose a greater risk to operat-
ing personnel.
– Keep all of the attached documents and pass on
the documentation if the machine changes own-
ership.
– Never use a damaged compressed air tool.
– Regularly inspect compressed air tool. The com-
pressed air tool must be marked with clearly leg-
ible rated values and markings. Replacement
signs can be ordered from the manufacturer.
Danger from ejected parts
– In the event the workpiece, accessory or machine
6 bar
parts break parts may be ejected at high speed.
-1 – Wear impact-resistant protective goggles.
– Wear a helmet when doing overhead work. Also
-1
assess the risks for other people.
4 mm
– Secure the workpiece. Use clamping devices or a
vice to hold the workpiece firmly.
Risk of getting caught
– Wear suitable protective clothing! Do not wear
2.1 kg
loose clothing or jewellery. They can be caught by
moving parts. Wear a hair net if you have long
hair.
Risks during operation
– Wear protective gloves.
– Operating and maintenance personnel must be
physically strong enough to handle the size,
weight and power of the machine.
– Hold the machine correctly. Prepare to counter-
act normal or sudden movements - hold the ma-
chine with both hands.
– Avoid abnormal posture. Ensure secure stance
and keep your balance at all times.