Intended Use; Technical Data; Functional Description; Operation - Festool ETS EC 125/3 EQ Manual De Instrucciones Original

English
The risk from these expo­
sures varies, depending on
how often you do this type of
work. To reduce your expo­
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

The sanders are designed for sanding wood,
plastic, composite, paint/varnish, filler and sim­
ilar materials as directed. With mixed dust con­
taining metal (such as dust resulting from paint
sanding in the automotive industry) and when
sanding damp surfaces, special safety instruc­
tions must be followed. The sanders are not in­
tended to be suitable for grinding bare metal.
Material containing asbestos cannot be proc­
essed.
The user is liable for improper or non-in­
tended use.
5

Technical data

Eccentric sanders
Power
Speed (no-load)
Sanding stroke
Sanding pad
Weight
6

Functional description

[1-1] ON/OFF button
[1-2] Speed control
[1-3] Sanding pad
[1-4] plug it connection
[1-5] Extractor connector
[1-6] Insulated gripping surfaces (grey
shaded area)
The pictures for the functional description are
at the beginning of the instruction manual.
6
ETS EC 125/3 EQ
3.6 A
6000 - 10000 min
-1
1/8" (3.0 mm)
Ø 5" (125 mm)
2.65 lbs (1.2 kg)
7

Operation

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► In North America, only Festool machines
with the voltage specifications 120 V / 60 Hz
may be used.
CAUTION
Heating of the plug it connection if bayonet
fitting is not completely locked
Risk of burns
► Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and disconnecting the mains power
cable - see fig. [2].
7.1

Switching on/off

ON Press the ON/OFF button [1-1]
OFF Press the ON/OFF button [1-1]
8

Settings

WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing any work on the
machine.
8.1 Electronics
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly.
2