Technical Data; Health Hazard By Dust; Intended Use - Festool RTSC 400 Li Manual De Instrucciones Original

English
Always use original Festool sanding pads.
–
While using the long-life dust bag be
–
aware of electric charge. Always when
possible use an antistatic suction hose
with the power tool. A slight electric shock
may cause you to panic briefly and become
distracted, which may result in an accident.
– Only use the mains adapter with this de­
vice.
– Only use the mains adapter together with
an original Festool plug it cable.
Battery pack and charger safety instructions
– This charger can be operated by persons
with reduced physical, sensory or mental
capabilities or a lack of practical experi­
ence and knowledge, provided they are su­
pervised or have been instructed to use the
machine safely and understand the dan­
gers of machine operation. Children are
not allowed use or play with the machine.
– Do not open the battery pack or the charg­
er!
– Prevent metal parts (e.g. metal chips) or
fluids from entering the charger!
Do not use power adapters or battery
–
packs form other manufacturers to oper­
ate the cordless power tool. Do not use
any charger from other manufacturers for
charging the battery pack. The use of im­
permissible accessories may result in elec­
tric shock and / or serious accidents!
– Protect the battery pack from excessive
heat > 50 °C or constant heat sources such
as sunlight or naked flames!
– Never use water to extinguish burning li-
ion battery packs! Use sand or a fire blan­
ket.
– Check the plug and the cable regularly and
should either become damaged, in order to
avoid a hazard, have them replaced by an
authorised after-sales service workshop.
– Always pull the mains plug out of the sock­
et when the charger is not in use.
5

Technical data

Cordless orbital sander
Voltage
No-load speed
Sanding stroke
6
3.3

Health hazard by dust

WARNING! various dust created by pow­
er sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known (to the State of California) to cause can­
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
– lead from lead-based paints,
– crystalline silica from bricks and cement
and other masonry products, and
– arsenic and chromium from chemically
treated lumber.
The risk from these expo­
sures varies, depending on
how often you do this type of
work. To reduce your expo­
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

The sanders are designed for sanding wood,
plastic, composites, paint/varnish, filler and
similar materials as directed. Metals and mate­
rials that contain asbestos must not be proc­
essed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi­
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in­
tended use.
DTSC 400 Li
18 - 20 V
6000 - 10000 min
5/64" (2.0 mm)
RTSC 400 Li
18 - 20 V
-1 6000 - 10000 min
5/64" (2.0 mm)
-1