Contents
1 Symbols..................................................... 17
7 Settings......................................................21
1
Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Inserting the battery pack
Removing the battery pack
Maximum power with two battery
packs (36 V).
Less power with one battery
pack (14.4 V/18 V).
Do not place down any saws with ex
posed saw blades
Direction of rotation of saw and the
saw blade
Electro-dynamic run-down brake
STOP
Do not dispose of it with domestic
waste.
Saw blade measurement
a = diameter
Tool contains a chip which stores data.
See section
12.1
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Handling instruction
Tip or advice
2
Safety warnings
2.1
General safety instructions for power
tools
WARNING! Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2
Safety instructions for specific circular
saws
Cutting procedures
-
DANGER: Keep hands away from
cutting area and the blade. Keep your sec
ond hand on auxiliary handle, or motor
housing. If both hands are holding the saw,
they cannot be cut by the blade.
Do not reach underneath the workpiece.
-
The guard cannot protect you from the
blade below the workpiece.
-
Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the
blade teeth should be visible below the
workpiece.
Never hold the workpiece in your hands or
-
across your leg while cutting. Secure the
workpiece to a stable platform. It is impor
tant to support the work properly to mini
mise body exposure, blade binding, or loss
of control.
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
English
17