Changing The Display; Ejecting A Cd; Mp3/Wma Mode; Preparing An Mp3/Wma Cd - Blaupunkt Daytona MP28 Instrucciones De Manejo

CD mode

Changing the display

Note:
The display can be changed only if the
display of the clock in activated in the
menu ("CLOCK ON")
To display the CD track,
u press the DIS button 8.
The display changes for approx. 5 sec-
onds.

Ejecting a CD

u button 1.
Press the
The control panel opens to the bottom.
u button C next to the CD
Press the
compartment.
The CD is ejected.
u
Remove the CD and close the control
panel.
Notes:
• If a CD is ejected, the drive will auto-
matically draw it back in again after
10 seconds.
• You can also eject CDs whilst the de-
vice is switched off or whilst another
audio source is activated.

MP3/WMA mode

You can also use this car sound system to
play CD-Rs and CD-RWs that contain MP3
music fi les. You can also play WMA fi les.
This chapters deals only with playing MP3
fi les since the operation for MP3 and WMA
fi les is identical.
Note:
WMA fi les with
Management (DRM) from online mu-
sic shops cannot be played with this
device.

Preparing an MP3/WMA CD

The various combinations of CD burners,
CD burning software and CD blanks may
lead to problems arising with the device's
ability to play certain CDs. If problems oc-
cur with your own burned CDs, you should
try another brand of CD blank or choose
another colour of CD blank.
The format of the CD must be ISO 9660
Level 1/Level 2 or Joliet. Other formats can-
not be played reliably.
Notes:
To ensure uninterrupted playback:
Do not try changing the fi le extension
•
to ".MP3" of any fi les other than MP3
fi les and then attempt to play them.
The device will ignore these invalid
fi les during playback.
• Do not use "mixed" CDs containing
both non-MP3 fi les and MP3 tracks
(the device only reads MP3 fi les
during MP3 playback).
MP3/WMA mode
Digital Rights
17