Set; Introduction; Information - Fri-Jado STG 5-i Instrucciones De Manejo

5.

Set

5.1.

Introduction

The settings of the unit can be changed using the control panel. There are three kinds of settings:
•

Information

• Manager
• Service
The service settings can only be accessed by a service mechanic.
5.2. Information
5.2.1. Access
1. Press the selection key above the 'settings' tab.
2. Select the required settings using the turning knob
and press OK.
3. By pressing the STOP/CANCEL button you will
return to the access menu.
5.2.2. Overview
A list of some pre-programmed settings will appear.
WWW.FRIJADO.COM 2-EN-21
STG 5 / 7 / 8 - I
9123494 rev. 7 / 2008