Environmental Protection; Standard Spare Parts - Stihl RMA 235 Manual De Instrucciones

15. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal ( 4.12).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
Always dispose of batteries
properly – observe local
regulations. Do not dispose of
batteries with domestic waste,
but hand it in to a specialist
dealer or at a hazardous waste collection
point.

16. Standard spare parts

Mowing blade:
6311 702 0110
Blade fastening screw:
9018 321 1800
Coupler:
6311 702 0600
26
The blade fastening screw and
coupler must be renewed when the
blade is replaced. Spare parts are
available from a STIHL specialist
dealer.
17. EU - Declaration of
conformity
17.1 Lawn mower, manually operated
and battery-powered (STIHL RMA)
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the machine
lawn mower, manually operated and
battery-powered (STIHL RMA)
manufacturer's STIHL
brand
type RMA 235.0
serial number 6311
conforms to the following EC directives:
2000/14/EC, 2014/30/EU, 2006/42/EC,
2006/66/EC, 2011/65/EU
The product has been developed in
conformance with the following standards:
EN 60335-1, EN 60335-2-77
The versions of the standards valid on the
production date apply to development and
production of the products.
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
STIHL Tirol GmbH
The year of manufacture and machine
number appear on the rating plate of the
machine.
Measured sound power level:
87,9 dB(A)
Guaranteed sound power level:
89 dB(A)
Langkampfen,
2019-01-02 (YYYY-MM-DD)
STIHL Tirol GmbH
Head of Design
17.2 STIHL charger AL 101
This charger has been manufactured and
brought into circulation in compliance with
the following directives:
2014/30/EU, 2014/35/EU, 2011/65/EU
The full EC Declaration of Conformity is
available from ANDREAS STIHL AG & Co.
KG.
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
0478 131 9841 B - EN