Service Schedule; Handover Confirmation; Service Confirmation - Stihl RMA 235 Manual De Instrucciones

Fault:
Charging fails to start after inserting
battery into charger
Possible cause:
– Battery too cold/too warm – 1 LED
illuminates red on battery
– No electrical contact between charger
and battery
– Charger power supply faulty
Remedy:
– Leave battery inserted in charger
Charging starts automatically as soon
as permissible temperature range is
reached.
– Remove and re-insert battery (
– Connect charger to mains (
– Check mains power supply
– Check charger, replace if necessary
( )
Fault:
Battery not charging – LED on charger
flashes red
Possible cause:
– No electrical contact between charger
and battery
– Charger defective
– Battery defective
Remedy:
– Remove battery, clean electric contacts
on charger ( 12.5)
– Check charger, replace if necessary
( )
– Replace battery ( )
0478 131 9841 B - EN

20. Service schedule

20.1 Handover confirmation

7.2)
7.3)

20.2 Service confirmation

Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
Service performed on
Next service date
23
29