HSM SECURIO AF100 Instrucciones De Servicio página 14

english
5 Operation
Switching on the document shredder
• Move the power switch on the back of
the document shredder to position "I".
Shredding paper
You can shred paper by feeding it directly into
the opening or you can use the automatic
intake. Paper can be fed in manually during
autofeed stack processing.
1. Feed the paper directly into
the feed opening
feeder is clear again.
2. Feed the paper using the automatic
feed tray
The document shredder is equipped with an
automatic feeder which can hold up to
100 sheets of paper.
14
The automatic start/
stop of the cutting unit
starts when paper is
fed in.
 The cutting unit is
switched off 5 seconds
after the automatic
start/stop in the paper
SECURIO AF 100
WARNING
Risk of injury during intake!
The intake rollers of the
automatic feed tray run
continuously during the
shredding process. Do not go
near the rollers with long hair,
loose clothing, ties, scarves,
necklaces, bracelets etc.
• Start the shredding process.
You have 2 options to do this:
a) Press the operation button
for 2 seconds.
 Start the cutting unit and the automatic
feed drive. The paper is fed into the cut-
ting unit.
The cutting unit switches off 5 seconds
after shredding all of the sheets
in the automatic feed tray.
Premature cancellation:
Press the operation button.
b) Feed one sheet of paper directly into
the feed opening.
 Start the cutting unit and the automatic
feed drive. The paper is fed into the cut-
ting unit.
The cutting unit switches off 5 seconds
after shredding all of the sheets in
the automatic feed tray.
Place the stack of
papers (max.
100 sheets, 80 g/m
the automatic feed tray.
CAUTION: The paper
must not have any
paper clips or staples
attached.
) in
2
04/2018