Technical Data - HSM SECURIO AF100 Instrucciones De Servicio

english

10 Technical data

Cutting type
Cutting size (mm)
Security level DIN 66399
Cutting capacity* (sheet), DIN A4
Weight
Intake width
Cutting speed
Power supply
Output with max. number of sheets
Energy consumption in standby mode
Operating mode
Operating time for max. number of sheets
Operating time for single sheet
Idle time
Operating ambient conditions:
Temperature
relative humidity
height above SL
Size W x D x H (mm)
Shredded material container volume
Emission sound pressure level when idle
A-weighted sound power level
(LWAd in idle mode)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²) fed in lengthways which can be cut in one cycle.
The specified capacity is determined with the cutting unit new and freshly oiled and the motor cold. A weaker mains
voltage or a different mains frequency to the one specified could result in less sheet capacity and increased noise during
operation. The sheet capacity may vary depending on the structure and properties of the paper and the way it is fed.
This document shredder meets the applicable harmonisation legislation of the European Union:
• EMC directive 2014/30/EU
• Low voltage directive 2014/35/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
18
70 g/m
2
80 g/m
2
SECURIO AF 100
Particle cut
4 X 25
P-4, T-4, E-3, F-1
6–7
5–6
6.5 kg
225 mm
45 mm/s
215–240 V, 50–60 Hz
110–130 V, 50–60 Hz
300 W
< 2 Wh
Brief operation
10 min
20 min
40 min
-10 °C up to +25 °C
max. 90%, non-condensing
max. 2,000 m
375 x 260 x 620
25 l
56 dB(A)
71 dB
04/2018