Setting The Temperature; Setting The Mode - Dometic CoolAir RTX1000 Instrucciones De Uso

Using the parking cooler
7.7

Setting the temperature

I
NOTE
Depending on the set unit for the temperature, the temperature is
changed in steps of either 1 °C or 2 °F.
Control panel
➤ Press the
➤ Press the
➤ Press the
Remote control
➤ Press the
+ button to increase the temperature.
➤ Press the
– button to decrease the temperature.
➤ To save the value don't press any button for more than 5 seconds.
7.8

Setting the mode

Control panel
➤ Press the
➤ Press the
To set the MANUAL mode see below.
➤ Press the
If you like to set the fan speed manually (MANUAL mode):
➤ Press the
➤ Press the
time the MANUAL mode is started.
➤ Press the
18
button until the
or button to set the desired temperature.
button to save the value.
button until the
or button to set the AUTO, ECO or BOOST mode.
button to start the selected mode.
button until the
or button to set the desired fan speed. At the same
button to save the value.
CoolAir RTX1000, RTX2000
symbol is displayed.
symbol is displayed.
symbol is displayed.
EN