Safety Rules - Festool OF 1400 EB Manual De Instrucciones Original/Lista De Piezas De Repuesto

Router
Technical data
Power
Speed (no load)
Quick height adjustment
Fine height adjustment
Drive shaft connection of the spindle
Router diameter
Weight (excluding cable)
Degree of protection
The specifi ed illustrations can be found at the beginning of the operating instructions.
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Wear ear protection!
Read the Operating Instructions/Notes!
1 Intended use
The routers are designed for routing wood, plas-
tics and similar materials.
Aluminium and plasterboard can also be proc-
essed with corresponding cutters such as are
listed in the Festool catalogues.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1

Safety rules

WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
- Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a „"live"" wire may make exposed metal
parts of the power tool „"live"" and could give
OF 1400 EBQ/OF 1400 EQ
1400 W
10000 - 22000 rpm
70 mm
8 mm
M22x1.0
max. 63 mm
4.5 kg
/ II
the operator an electric shock.
- Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the
body leaves it unstable and may lead to loss of
control.
- Do not exceed the maximum speed specifi ed on
the tool and/or keep to the speed range.
- The clamping collet should only be used to
clamp tools with a shank diameter appropriate
for the collet.
- Check that the cutter is fi rmly fi tted and runs
freely.
- The clamping collet and union nut must show
no signs of damage.
- Cracked or distorted cutters must not be
used.
Wear suitable protection such as
ear protection, safety goggles, a
dust mask for work which gener-
ates dust, and protective gloves
when working with raw materials
and when changing tools.
3 Noise and vibration information
The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Overall vibration levels (vector sum for three
directions) measured in accordance with EN
60745:
Vibration emission level (3-axis)
Uncertainty
The emission values specifi ed (vibration, noise)
were measured in accordance with the test con-
ditions stipulated in EN 60745 and are intended
13
82 dB(A)
93 dB(A)
K = 3 dB
a = 3.5 m/s²
h
K = 2.0 m/s²