Mettler Toledo IND246 Guia De Instalacion página 27

15. For the AC model: Reconnect the black/brown and white/blue AC power wires
to the terminal plug, and reconnect it to the main board, in the location
indicated in Figure 2-4.
Figure 2-7: AC Wire Termination
16. For the battery-powered model: Reconnect the battery power connector to the
main board (Figure 2-5).
17. Once the enclosure is closed, use the four screws to attach the brackets to the
bottom of the terminal, as shown in Figure 2-8.
IND246 Terminal Installation Manual
Housing, rotated
Power wire relocated
Ground straps/hinges reconnected
Figure 2-6: Housing Reversed
2-5