Remote Control - Franke FMYCF 906 WH Manual De Uso

5. REMOTE CONTROL

This appliance can be commanded using
a remote control, powered by a CR2032
type 3 V battery (not supplied).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
waste, they must be put into the specific
containers.
Motor On / Off.
-
-
Brief pressure: Light On – Medium Light –
Light Off.
To change the intensity of the light in cycle,
make long, separate presses on the button.
This allows variation of the light tone from
"warm" to "cool".
Activates/Deactivates the Intensive function.
Activates/Deactivates the Delay function.
Increases the working speed each time it is
pressed.
Decreases the working speed each time it is
pressed.
6. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
12