Remote Control - Franke FCFL 906 Manual De Uso

Remote control

The appliance can be controlled using a re-
mote control powered by a 1.5 V carbon-zinc
alkaline batteries of the standard LR03-AAA
type (not included).
• Do not place the remote control near to
heat sources.
• Used batteries must be disposed of in the
proper manner.
Motor On/Off.
Decreases the working speed each time it
is pressed.
Increases the working speed each time it
is pressed.
Activates the INTENSIVE function
This speed is timed to run for 6 minutes.
At the end of this time, the system returns
automatically to the speed that was set be-
fore. If it is activated with the motor turned
off, it will switch to OFF at the end of the
time. It is disabled by pressing the button
again or pressing the "Motor OFF" button.
of the hood (lights + motor) after 30 minutes.
- Press and hold this button for a few seconds to
deactivate Delay mode, or turn the motor off. The
Lights On / Off
10
Lighting
• For replacement contact technical support
("To purchase contact technical support").