Dometic SINEPOWER MSI 2312T Instrucciones De Montaje Y De Uso página 14

Technical description
• Overloading and short circuit shutdown: The LED on the inverter indicates
an operating fault (constant red light) when an excess load is connected or a short
circuit has occurred. The fuse in the device must be pressed in again by hand after
it is triggered by excess current.
• Incorrect polarity protection: The incorrect polarity protection prevents the
wrong polarity when connecting the inverter.
I
NOTE
The individual values are found in the chapter "Technical data" on
page 29.
The inverters have a 230 Vw socket and a connection terminal for permanent
connection.
Due to the voltage synchronisation with the AC input voltage, the inverter is suitable
for operating sensitive consumers which react to an irregular voltage supply.
The device can also be configured with a PC via an RS-232 interface and using the
DIP switches on the device.
The inverter can be switched to an energy-saving mode to prevent the connected
battery from discharging too quickly.
Parallel operation allows up to three inverters (of the same model) to run at the same
time.
The inverter can be easily controlled using the remote control (accessory).
14
SinePower
EN