Dometic SINEPOWER MSI 2312T Instrucciones De Montaje Y De Uso página 15

SinePower
7.1 Control elements
Control elements of the inverter (fig. 5, page 4)
Item Description
1 Dip switch
2 LED
3 Main switch
"ON/OFF/REMOTE" switch
4 Fuse
5 Grounding screw
7.2 Connections
I
NOTE
The version for continental Europe is depicted.
Connections of the inverter (fig. 5, page 4)
Item Description
6 AC input
7 AC output
8 Earth terminal
9 POS+
10 CAN1 and CAN2 port
11 Green terminal
12 RS-232 port, REMOTE port
13 NEG–
14 LCM
EN
Description
Makes settings on the inverter (such as mains
voltage, mains frequency, energy-saving
mode).
See chapter "Status indications" on page 23
Switches the device on, off or to operation via
the remote control (accessory)
Protects the inverter from overload.
The fuse can be pressed in again once it has
triggered.
Sets or removes the grounding bridge
Description
230 Vw input jack
230 Vw output jack
Earthing on the vehicle bodywork
Positive terminal
CAN BUS connections
Setup of remote switch and parallel operation
Connection of a PC using a serial RS-232
interface or connection of the MCR7 or
MCR9 remote control
Negative terminal
Remote control connection
Technical description
15