Dometic SINEPOWER MSI 2312T Instrucciones De Montaje Y De Uso página 25

SinePower
Switching to energy-saving mode
You can set the energy-saving mode using the S4, S5 and S6 dip switches. In this
way, the battery you connect to the inverter is not discharged as quickly.
The inverter operates in energy-saving mode as long as the required power is below
the set level. If the required power exceeds the set level, the inverter works in normal
mode.
The values to be set on your inverter can be found in the following table:
Energy-saving mode
Off
2%
3%
4%
5%
6%
7%
8%
Defining settings
Using the S8 dip switch you can define whether the parameter of the setting should
be made using the connection for the remote control or the dip switches.
Parameter
Remote control connection
Dip switch
EN
DIP switch
S4 S5
Off Off
On Off
Off On
On On
Off Off
On Off
Off On
On On
Dip switch
S8
Off
On
Using the inverter
S6
Off
Off
Off
Off
On
On
On
On
25