Description; Product Overview; Feature Description; Intended Use - Dräger FPS 7000 Instrucciones De Uso

Description

2 Description
2.1

Product overview

Facepiece (see Figure Z1 on Page 182)

Connector type (see Figure Z2 on Page 182)

1 Visor frame, top
3 Adjuster buckle
5 Facepiece body
7 Cap
9 Nose cup valve
11 Visor
13 Button
15 Exhalation valve seat
17 Spring holder
19 Inhalation valve disc
and valve seat
21 O-Ring
170
2 Head harness
4 Neck strap
6 Exhalation valve cover
8 Visor frame, bottom
10 Nose cup
12 Connector
14 Speech diaphragm
16 Exhalation valve spring
18 Exhalation valve disc
20 Clamping ring
(Use Instructions for NIOSH-approved full facepieces)
2.2

Feature description

Dräger FPS 7000 facepieces are available with the following
connectors:
round thread connection RD40x1/7" according to EN 148-1
RA
for canisters
plug connection (Dräger-specific)
P
breathing apparatus or air line breathing apparatus
Special facepiece spectacles are available for users who wear
spectacles.
Instead of the harness a special hairnet can be used.
2.3

Intended use

The facepieces of the Dräger FPS 7000 series protect the face and the
eyes against aggressive media.
2.4

Special or critical user's instructions

The temperature range for donning the facepiece is between +5 °F
and +140 °F (-15 °C to +60 °C).
The temperature range for use during operation is between -22 °F and
+140 °F (-30 °C to +60 °C).
Lower or higher temperatures are permitted when the exposure time
is short.
for self-contained
Dräger FPS 7000