During Use; After Use - Dräger FPS 7000 Instrucciones De Uso

Ocultar thumbs Ver también para FPS 7000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Use
3.2

During use

WARNING
!
Make sure that the facepiece is airtight before reporting for
duty, otherwise there is danger of serious injury or death due
to exposure to smoke, chemicals, or other harmful
substances, including but not limited to poisoning.
When the facepiece is used with a canister,
the ambient air must contain at least 19.5 % of oxygen;
observe country-specific regulations.
never enter unventilated tanks, pits, canals, etc.
the type of pollutants must be known. Choose corre-
sponding canister.
Low temperatures
Use facepieces with a PCaf visor or use "klar-pilot" anti-fog agent to
prevent fogging of the visor.
High temperatures/Thermal cycling
WARNING
!
Leave the danger zone immediately if there are any signs of
damage, e.g., bubbles in the visor.
The coating may dissolve in some places on visors marked with PCas
and PCaf. The facepiece is fully serviceable until the end of the
operation. Replace visor after use.
Chemicals
Some substances may be absorbed by the material of the facepiece
body or may possibly diffuse into it. Further information can be
obtained from Dräger.
174
3.3
RA
P
2. Pull the adjuster buckles of the neck straps forward with your
3. Pull the facepiece away from your face over the head.
(Use Instructions for NIOSH-approved full facepieces)

After use

WARNING
!
Do not doff the facepiece unless you are decontaminated and
in a safe environment.
1. Remove the canister from the facepiece.
1. Press the button and simultaneously pull the lung
demand valve out of the connector.
CAUTION
!
When doffing the facepiece, do not pull the facepiece at the
connection piece to prevent damaging the facepiece!
thumb and loosen the straps (see Figure E on Page 182).
Dräger FPS 7000

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fps 7000 s-fixFps 7000 q-fix

Tabla de contenido