General Regulations - IKRA BHT 60 Instrucciones De Manejo

GB
OPERATING MANUAL
1. CONGRATULATIONS
Dear Client,
May we congratulate you for having chosen
one ofour products for your garden.
Your HEDGETRIMMER has been manufac-
tured in accordance with the current safety
regulations, which protect the consumer.
This manual describes and illustrates the
assembly, use and maintenance operations,
which are required in order to keep your
HEDGETRIMMER inperfect condition.
TO FACILITATE READING
The illustrations relating to the assembly
and machine description are to be found at
the beginning oft his booklet. Keep these
pages open while reading the assembly
instructions.
Should your HEDGETRIMMER need serv-
icing or repair, please contact your retailer
or an authorised service centre.
2.ESSENTIAL SAFETY PRECAUTIONS

GENERAL REGULATIONS

PRECAUTIONS:
A1 - The use of your HEDGE -
TRIMMER can cause serious in-
jury, therefore the following safety
instructions should be followed:
A2 - All users of the HEDGETRIM-
MER must first carefully read the
maintenance and operating manual
and familiarise themselves fully
with all controls for correct opera-
tion of the machine.
A2.1 - Keep this manual for future
reference.
A3 - Do not let children and peo-
ple who have not fully read these
GB-1
instructions to use the HEDGET-
RIMMER.
DANGER:
A4 - Do not start up and do not use
the hedgecutter near people (spe-
cially children) and animals.
During operation, a minimum dis-
tance of 10 m between the machine
and other people should be kept.
A5 - Be aware of any possible dan-
gers which cannot be heard due
to the noise produced by the ma-
chine.
A6 - Remove any dangers, cables
or electrical cables from the work-
ing area.
A7 - The operator is responsible for
any accidents or hazards that may
occur to other persons or their be-
longings.
OPERATION:
B1 - Only use the HEDGETRIM-
MER to cut hedges, bushes and
saplings. Do not use the machine
for other purposes.
B2 - Wear clothing and safety
equipment suitable for HEDGET-
RIMMER operation. During opera-
tion wear close-fitting clothing and
not loose or baggy garments. Do
not wear objects which can get
caught in the moving parts
B3 – Wear approved protective
goggles or visor.
B3.1 – Wear approved noise-
damping earplugs.
Noise emission information in
accordance
Product Safety Act (ProdSG) and
the EC Machine Directive: the
noise pressure level at the place
of work can exceed 80 dB(A). In
Translation of the original Operating Instructions
with the German