Technical Data; General Power Tool Safety Warnings - IKRA HAHS-I-20 Manual Original

EN ENGLISH

TECHNICAL DATA

Hedge trimmer
Battery voltage
Cutting length
Weight without battery
Noise information
Measured according to
Sound pressure level L
Sound power level L
WA
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K = 1,5 m/s
Vibration emission value a
Battery Charger
Input voltage
Frequency
Output voltage
Output current
Input power
Recommended battery
types
Subject to technical alterations and amendments.
Warning: The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY WARNINGS

General Power Tool Safety Warnings

Warning
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool and battery-operated
(cordless) power tool.
1) Work area safety
12
EN 60745; 2000/14/ EG; Uncertainty K = = 3 dB (A)
1) 2)
1)
pA
2)
h
JLH262102000G
220 - 240 V
50 - 60 Hz
21 V
2 A
60 W
Typ LI 22 / LBC202Z-2
Battery
Battery voltage
Battery capacity (Li-Ion)
Battery power
Recommended chargers
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool.Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmo-
HAHS-I-20
20 V
540 mm
2,1 kg
73 dB (A)
92 dB (A)
2
<2,0 m/s
2
Typ LI 22 /
LBC202Z-2
20 V
2,0 Ah
40 Wh
JLH262102000G