Maintenance - Dexter 20VJS2-28.1 Manual De Instrucciones

FR FR

6. MAINTENANCE

ES ES
PT PT
IT IT
EL EL 1. Remove the battery from the power tool before carrying out work on the power tool (e.g.
maintenance, changing tool, etc.). The battery should also be removed for transport and
storage. There is risk of injury from unintentionally pressing the on/off switch.
PL PL
2. To ensure safe and efficient operation, always keep the power tool and the ventilation slots
clean. If the dust outlet becomes blocked, switch off the power tool, disconnect the dust
RU RU
extraction system and remove the dust and chips.
3. Clean the saw blade receptacle regularly. For this, remove the saw blade from the power tool
UA KZ
and lightly tap out the power tool on a level surface.
4. If the power tool becomes very dirty, this can lead to serious faults. For this reason, do not cut
materials which generate large quantities of dust from below or overhead.
UA KZ
5. Apply a drop of oil to the guide roller from time to time. Check the guide roller regularly. If worn,
it must be replaced by an authorised after-sales service agent.
RO RO
BR BR
EN
EN
336
WARNING! Always switch the product off, remove the battery pack from the tool and let
the product cool down before performing inspection, maintenance and cleaning work!
Only perform care and maintenance work according to these instructions! All further
works must be performed by a qualified specialist!