Ottobock 432B1 Instrucciones De Uso página 4

6.1 Haftung
Der Hersteller haftet, wenn das Produkt gemäß den Beschreibungen und
Anweisungen in diesem Dokument verwendet wird. Für Schäden, die durch
Nichtbeachtung dieses Dokuments, insbesondere durch unsachgemäße
Verwendung oder unerlaubte Veränderung des Produkts verursacht werden,
haftet der Hersteller nicht.
INFORMATION
Last update: 2015-04-01
• Please read this document carefully before using the product.
• Follow the safety instructions to avoid injuries and damage to the product.
• Instruct the user in the proper and safe use of the product.
• Please keep this document in a safe place.
INFORMATION
• You can request this document as a PDF file from the Customer Care
Center (CCC) at oa@ottobock.com or from the manufacturer's ser-
vice department (see inside back cover or back page for addresses).
• It is possible to increase the display size of the PDF document.
1 Indications for use
The 432B1, 438B1, and 448A13 Vacuum Bags are used to fabricate molds/
contours of the human body. Such a mold will be used in the fabrication of
a digital model (using the Shape technique) or a plaster model.
2 Fields of application
Seat and back vacuum bags are used. The back vacuum bags are distin-
guished by two lateral supports.
To fabricate a complete mold, one seat and one back vacuum bag are
required.
The width of the vacuum bag should be a bit larger than the body rather
than too small.
4 | Ottobock
English