Pc Connection Using Pca-Upload; Looking After Your Pulsetrace Pca2 - CareFusion PulseTrace PCA2 Manual Operativo

PC connection using PCA-Upload

PCA2 Upload is an easy to use PC based windows application that
interfaces to the PulseTrace PCA2 via a USB or serial port.
incorporates a database into which patient details and test results
may be uploaded from the PulseTrace PCA2 to the PC. The data can
then be easily reviewed; patient details can be edited; additional
notes added; and the data can be exported as a .CSV file to other
applications e.g. Microsoft Excel.
PCA2 Upload software is available as a free download from
www.carefusion.com/micromedical. Please contact Technical Services
for installation instructions and system requirements.
The PulseTrace PCA2 is connected to the serial or USB port on the
PC, and to the port on the right hand side of the device using the
USB or serial cable provided with the unit.
Note: The PulseTrace PCA2 should only be connected to a computer
that is manufactured in accordance with EN60950 1992/1993 –
'Safety of Information Technology Equipment including Electrical
Business Equipment'.
Keep the PC out of reach of the patient at all times.
It is recommended that whilst the unit is connected to a computer
the mains adapter is used.

Looking after your PulseTrace PCA2

Please observe the following precautions:
Do not touch the screen with fingers. Only use the stylus
•
provided.
Only use a damp, lint free, cloth to clean the screen.
•
Do not keep the unit in a damp place or expose it to
•
extremes of temperature.
Avoid exposing the PulseTrace PCA2 to direct sunlight.
•
17
It