Technical Data - Dräger X-am 5000 Instrucciones De Uso

Technical data

Excerpt: See the Technical Handbook for details
Ambient conditions: during operation and storage
Temperature class T4 (-20 to +50 °C):
NiMH power packs type: HBT 0000, HBT 0100
Power pack type: ABT 0100
with alkaline single cell type: Duracell Procell MN 1500
Duracell Plus Power MN 1500
Temperature class T3 (-20 to +40 °C):
Power pack type: ABT 0100
with NiMH single cell type: GP 180AAHC
with alkaline single cell type: Panasonic LR6 Powerline
Temperature class T3 (0 to +40 °C):
Power pack type: ABT 0100
with alkaline single cell type: Varta 4006
Temperature range over a short period
-40 to +50 °C
Maximum of 15 minutes with NiMH power pack T4 (HBT 0000) or T4 HC (HBT
0100) Requirement: storage of the instrument at room temperature (+20 °C)
for at least 60 minutes in advance.
Air pressure 700 to 1300 hPa
Humidity 10 to 90 % (to 95 % short-term) rel. hum.
Position of use any
Storage time
X-am 5000 1 year
Sensors 1 year
Electrical classification IP 67 for instrument with sensors
26
1)
2)
,
2)
2)
2) 2)
, Varta 4106
2)
:
Alarm volume Typically 90 dB (A) at 30 cm distance
Operating time:
– Alkaline battery Typically 12 hours under normal conditions
– NiMH-
power pack:
T4 (HBT 0000) Typically 12 hours under normal conditions
T4 HC (HBT 0100) Typically 13 hours under normal conditions
Dimensions: approx. 130 x 48 x 44 mm (H x W x D)
Weight: approx. 220 to 250 g
Refresh interval for 1 s
display and signals:
1) Technical manual, instructions for use/data sheets of the sensors used can be downloaded at
www.draeger.com/ifu. The CC-Vision PC software can be downloaded at www.draeger.com/
software. See also the instructions for use provided and the data sheets for the sensors used.
2) Not part of the BVS 10 ATEX E 080 X and PFG 10 G 001 X technical suitability tests.