Apex SpO2 Manual De Uso página 12

English
Max. pulse rate
While in the Max. pulse rate setup mode, the
second and with the Max. value shown on the screen. If adjustment is not needed,
press to setup Min. pulse rate or wait 10 seconds to exit.
The default value of Max. pulse rate is 140.
Press or for adjustment.
Press to show the following values.
Current value → +5 → +10 → ...... → 250, press
Current value → -5 → -10 → ...... → Min. +5, press
Press the to exit the mode with having the default value saved.
Min. pulse rate
While in the Min. pulse rate setup mode, the
second and with the Min. value shown on the screen. If adjustment is not needed,
press to enter the memory interval mode or enter the sound volume setup
mode or wait 10 seconds to exit the setup mode.
The default value of Min. pulse rate is 45.
Press or for adjustment.
Press to show the following values.
Current value → +5 → +10 → ...... → Max. –5, press
interval mode or the sound volume setup mode.
Current value → -5 → -10 → ...... → 30, press
mode or the sound volume setup mode.
Press the to exit the mode with having the default value saved.
Memory interval mode
While in the memory mode, the
screen. If no modification is needed, press the
or to wait for 10 seconds to exit the SET mode.
The default of the memory is for 5 minutes. It could be set for 4 intervals including
5-minute, 10-minute, 30-minute, and 60-minute. "0" stands for no memory setup.
Press the or to setup.
Press the and the following values appear:
Current value (5)→(10)→(30)→(60), stay unchanged from this point on and press
the to enter the sound control mode.
10
icon will flicker once every
to setup Min. pulse rate.
to setup Min. pulse rate.
icon will flicker once every
to enter the memory
to enter the memory interval
and memory interval mode appears on the
to enter the sound control mode