Safety Information - Apex SpO2 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

English

1. Safety information

WARNING: The SpO
device is to be operated by trained personnel only.
2
WARNING: Do not use the SpO
device in the presence of flammable anesthetics to
2
prevent explosion hazard.
WARNING: Do not use the SpO
device in the Magnetic Resonance Imaging (MRI)
2
ambience.
WARNING: The SpO
readings and pulse signals can be affected by the conditions of
2
ambience, probe, and patient.
WARNING: Do not open up the SpO
device except for the battery cover. The SpO
2
device is without any user-serviceable part inside and only qualified service
personnel can perform maintenance service.
WARNING: Do not expose the SpO
device to extreme moisture (such as rain) to ensure
2
accurate performance and device safety.
WARNING: If the accuracy of measurement by the SpO
patient's vital signs by alternate means.
WARNING: This device is intended only as an adjunct in patient assessment. It must be
used in conjunction with clinical signs and symptoms.
WARNING: Reposition the probe at least once every 4 hours to allow the patient's skin
to breath.
WARNING: The SpO
device is intended for the use of adult and individual over 40kgs
2
only.
WARNING: Do not use the SpO
device with other devices (such as, the cuff of blood
2
pressure monitor) that may interfere with blood flow and cause inaccurate
measurement.
WARNING: The SpO
device will be affected by electromagnetic interference during
2
operation.
WARNING: Please remove the batteries from the battery compartment if the device will
not be used for a long period of time.
2
device is uncertain, check the
2
1

Publicidad

Tabla de contenido
loading

Tabla de contenido